・Takeo Kato, Hirotaka Nakatani and Yusuke Ashizawa: Brain Activation During Sketch Task for Design Idea Generation Measured By NIRS, Journal of the Science of Design, Vol.5, No.1 ,pp.1-8, 2021
DOI: https://doi.org/10.11247/jsd.5.1_1_1

・Takeo Kato and Taishi Matsumoto: Morphological Evaluation of Closed Planar Curves and Its Application to Aesthetic Evaluation, Graphical Models, Vol.109, 101064 (9 pages), 2020
DOI: https://doi.org/10.1016/j.gmod.2020.101064

・Yuma Sakae, Takeo Kato and Yoshiyuki Matsuoka: Exploring Research Themes of Design Research Based on Multispace Design Model -Analyzing Design Studies and Journal of Engineering Design (2006-2015), Journal of the Science of Design, Vol.4, No.1 ,pp.29-38, 2020
DOI: https://doi.org/10.11247/jsd.4.1_1_29

・Daisuke Iseki, Takeo Kato and Yoshiyuki Matsuoka: Approaches for Improving M Method Based on Requirements for Idea Generation Methods, Journal of the Science of Design, Vol.4, No.1, pp.39-48, 2020
DOI: https://doi.org/10.11247/jsd.4.1_1_39

2019

・Daisuke Iseki, Shota Amabe, Takeo Kato and Yoshiyuki Matsuoka: Proposition of M Method System, International Journal of Engineering and Technology, Vol. 11, No. 1, pp. 55-61, 2019
DOI: https://doi.org/10.7763/IJET.2019.V11.1123

・Taishi Matsumoto, Koichiro Sato, Yoshiyuki Matsuoka and Takeo Kato: Quantification of “Complexity” in Curved Surface Shape Using Total Absolute Curvature, Computers & Graphics, Vol.78, pp. 108-115, 2019
DOI: https://doi.org/10.1016/j.cag.2018.10.009

・Masatoshi Muramatsu and Takeo Kato: Selection Guide of Multi-Objective Optimization for Ergonomic Design, Journal of Engineering, Design and Technology, Vol.17, Issue1, pp.2-24, 2019
DOI: https://doi.org/10.1108/JEDT-08-2017-0084

2018

・Satoru Furugori, Takeo Kato and Yoshiyuki Matsuoka: Automotive Safety Control System Based on Timeaxis Design, Mobility & Vehicle Mechanics, Vol.44, No.3, pp.43-52, 2018
DOI: https://doi.org/10.24874/mvm.2018.44.03.04

・Takeo Kato, Shogo Otagiri, Yusuke Nagamori and Yuuichi Izu: Comparison of Brain Activities Between Hand and Computer Drawings in Finke’s Pattern Generation Task, Journal of the Science of Design, Vol.2, No.2, pp.43-52, 2018
DOI: https://doi.org/10.11247/jsd.2.2_2_43

・Yuma Sakae, Shota Mukai, Koichiro Sato, Takeo Kato and Yoshiyuki Matsuoka: Comparative Analysis of Research for Design and Engineering Design from Viewpoint of Multispace Design Model -The Case of Bulletin of JSSD and Transactions of the JSME-, Journal of the Science of Design, Vol.2, No.2, pp.15-24, 2018
DOI: https://doi.org/10.11247/jsd.2.2_2_15

・Mikako Shannon Arita, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka: Development of Basic Architecture for Health Monitoring Seat System, Journal of the Science of Design,　Vol.1, No.2, pp.71-80, 2018
DOI: https://doi.org/10.11247/jsd.1.2_2_71

2017

・Yuuichi Izu, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka: Relationship between Drawing Skills and Process of Drawing in Still Life Drawing and Sketching, Bulletin of Japanese Society for the Science of Design, Vol.64, No.2, pp.55-64, 2017　(in Japanese)
DOI: https://doi.org/10.11247/jssdj.64.2_55

・Kengo Yoshinaga, Takeo Kato and Yoshihiro Kai: Clustering Method of Design Structure Matrix for Trade-off Relationships, Journal of the Science of Design, Vol.1, No.1, pp.77-86, 2017
DOI: https://doi.org/10.11247/jsd.1.1_1_77

2016

・Yuichi Izu, Koichiro Sato, Takeo Kato and Yoshiyuki Matsuoka: Consideration of Role of Sketching Based on the Multispace Design Model, Bulletin of Japanese Society for the Science of Design, Vol.62, No.5 pp.89-96, 2016
DOI: https://doi.org/10.11247/jssdj.62.5_89

・Takeo Kato and Satoshi Katsumata: Human Design Technology Using Quality Function Deployment and Its Application, Bulletin of Japanese Society for the Science of Design, Vol.62, No.5, pp.31-40, 2016
DOI: https://doi.org/10.11247/jssdj.62.5_31

・ Takeo KatoHiroki Masaki, Yohei Ishikawa, Naoto Tanaka, Koichiro Sato and Yoshiyuki Matsuoka: Classification of Shape Design Know-hows Extracted from Experienced Designers, Journal of Japan Society for Design Engineering, Vol.51, No.4, pp.231-245, 2016 (in Japanese)
DOI: https://doi.org/10.14953/jjsde.2015.2648

・ Takeo Kato, Takumi Koyama and Ryusuke Katsumata：Proposal of Design Guideline for Articulated Backrest of Wheelchair, Journal of Japan Society for Design Engineering, Vol.51, No.3, pp.167-180, 2016 (in Japanese)
DOI: https://doi.org/10.14953/jjsde.2015.2660

2015

・ Takeo Kato, Masayuki Ochiai, Yoshihiro Kai and Akihiko Azetsu：Proposal of Project Based Learning Class Based on Curriculum Analysis, Journal of Japan Society for Design Engineering, Vol.50, No.12, pp.625-630, 2015 (in Japanese)

・ Takeo Kato, Takumi Koyama and Takanori Inoue：Classification of Sitting Postures and Body Pressure Distribution and Sitting Comfort Evaluation of Office Chair, Bulletin of Japanese Society for the Science of Design, Vol.61, No.6, pp.1-8, 2015 (in Japanese)
DOI: https://doi.org/10.11247/jssdj.61.6_1

・Takeshi Kitamura, Daisuke Sannan, Kento Sugiyama, Masashi Kikuchi, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka：Robust Design of Seat Forward Tilt Function Considering Diverse Conditions, Journal of Japan Society for Design Engineering, Vol.50, No.2, pp.89-97, 2015 (in Japanese)

2014

・Saori Sone and Takeo Kato: Optimization of Cushion and Back Angles for Lower Limb Blood Flow and Its Verification Experiment,Bulletin of Japanese Society for the Science of Design, Vol.61, No.3, pp.97-104,2014
DOI: https://doi.org/10.11247/jssdj.61.3_97

・Takeo Kato, Souhei Noguchi, Kengo Yoshinaga and Yoji Hoshino: Multispace Quality Function Deployment for Modularization,Bulletin of Japanese Society for the Science of Design, Vol.61, No.3, pp.77-86, 2014
DOI: https://doi.org/10.11247/jssdj.61.3_77

・ Takeo Kato, Masaru Takeuchi and Gentaro Otsuji：Modeling of Skill and Knowledge for Mechanical Design Based on Literature Research of Mechanical Design Education, Journal of Japan Society for Design Engineering, Vol.49, No.10, pp.528-534, 2014 (in Japanese)

・Takeo Kato, Shigehiro Horiuchi, Koichiro Sato and Yoshiyuki Matsuoka: Multispace Quality Function Deployment Using Interpretive Structural Modeling,Bulletin of Japanese Society for the Science of Design, Vol.61, No.1, pp.57-66, 2014
DOI: https://doi.org/10.11247/jssdj.61.1_57

・Yuuichi Izu, Koichiro Sato, Takeo Kato and Yoshiyuki Matsuoka：Effect Analysis of Sketching Skills in Keyword Extraction, Bulletin of Japanese Society for the Science of Design, Vol.60, No.6, pp.79-88, 2014 (in Japanese)
DOI: https://doi.org/10.11247/jssdj.60.6_79

・Yuuichi Izu, Koichiro Sato, Takeo Kato and Yoshiyuki Matsuoka：Analysis of Rough Sketches and Idea Sketches Using Structural Model of Sketching Skills, Bulletin of Japanese Society for the Science of Design, Vol.60, No.6, pp.71-78, 2014 (in Japanese)
DOI: https://doi.org/10.11247/jssdj.60.6_71

・Takeo Kato and Masatoshi Muramatsu: Robust Design Method for Adjustable Mechanisms, Journal of Mechanics Engineering and Automation, Vol.4, No.1, pp.16-24, 2014
DOI: https://doi.org/10.17265/2159-5275/2014.01.002

・Takeo Kato, Masatoshi Muramatsu, Suguru Kimura and Yoshiyuki Matsuoka: Robust Design Method Using Adjustable Control Factors,International Journal of Automation Technology Vol.8, No.3, pp.333-343, 2014
DOI: https://doi.org/10.20965/ijat.2014.p0333

2013

・Takeshi Kitamura, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka: Optimization of Public Seat Functions to Assure a Comfortable Sitting Posture in Diverse Conditions,Global Journal of Research in Engineering Vol.13（No.8-A）pp.9-17, 2013
URL: https://engineeringresearch.org/index.php/GJRE/article/view/869

・Yuuichi Izu, Koichiro Sato, Takeo Kato and Yoshiyuki Matsuoka：Analysis of Designers’ Sketches Using Structural Model of Sketching Skills- Research on the Role and Effects of Display Skills in Design Idea Generation (2), Bulletin of Japanese Society for the Science of Design, Vol.60, No.4, pp.61-68, 2013 (in Japanese)
DOI: https://doi.org/10.11247/jssdj.60.4_61

・Takeo Kato, Shigehiro Horiuchi, Koichiro Sato and Yoshiyuki Matsuoka: Quality Function Deployment Based on the Multispace Design Model, Bulletin of Japanese Society for the Science of Design, Vol.60, No.1, pp.77-86, 2013
DOI: https://doi.org/10.11247/jssdj.60.1_77

・Takeshi Kitamura, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka: Physiological Analysis for Universal Design of Public Seat Under Diverse Conditions, Journal of Literature and Art Studies, Vol.3, No.2, pp.125-136, 2013
DOI: https://doi.org/10.17265/2159-5836/2013.02.007

・Suguru Kimura, Takeo Kato and Yoshiyuki Matsuoka：Robust Design Method Using Adjustable Control Factors for Deriving Optimum Adjustable Range, Journal of Japan Society for Design Engineering, Vol.48, No.1, pp.24-32, 2013 (in Japanese)

2012

・Yuuichi Izu, Koichiro Sato,Takeo Kato, Yoshiki Ujiie and Yoshiyuki Matsuoka：Structural Model of Sketching Skills in Product Design – Research on the Role and Effects of Display Skills in Design Idea Generation (1), Bulletin of Japanese Society for the Science of Design, Vol.59, No.4, pp.61-70, 2012 (in Japanese)
DOI:https://doi.org/10.11247/jssdj.59.4_61

・Yoshiki Ujiie, Takeo Kato, Koichiro Sato and Yoshiyuki Matsuoka: Curvature Entropy for Curved Profile Generation, Entropy, Vol.14(3), pp.533-558, 2012
DOI: https://doi.org/10.3390/e14030533

・Takeo Kato, Yoshiki Ujiie and Yoshiyuki Matsuoka: Proposal of Robustness Indices for an Objective Characteristic with Non-normal Distribution, Journal of Japan Society for Design Engineering, Vol.47, No.2, pp.104-111, 2012

2011

・Takeo Kato, Atuski Watai and Yoshiyuki Matsuoka：A Robust Design Method for Multiple Adjustable Control Factors, Journal of Japan Society for Design Engineering, Vol.46, No.6, pp.346-354, 2011 (in Japanese)

・ Takeo Kato, Satoshi Nakatsuka and Yoshiyuki Matsuoka：Proposal of a Robust Design Method for Control Factors with Adjustable Range, Journal of Japan Society for Design Engineering, Vol.46, No.3, pp.149-156, 2011 (in Japanese)

2007

・ Takeo Kato,, Yoshiki Ujiie and Yoshiyuki Matsuoka：Proposal of Measures of Robustness for an Objective Characteristic with Non-normal Distribution, Journal of Japan Society for Design Engineering, Vol.42, No.6, pp.333-340, 2007 (in Japanese)